Simply raise your arm to turn as you would normally and the built in amber LED's light-up on your sleeve, displaying your turn to the traffic around you. The LED's switch off automatically after 10 seconds, allowing you to safely complete your turn with both hands on the handlebars; the entire process is controlled by your natural body movement.
Where is the battery pack?
The battery may need to be charged prior to use. If it works ‘out-of-the-bag’, continue to use it until the LEDs no longer operate. If the battery is not powering the lights when you receive the item, just plug it into any USB-enabled plug (or your computer). Once charged, plug the battery into the jacket by locating the correct socket (marked on the battery) and attaching the ribbon cable with a black multi-pin connector, found in the small pocket on the inside of the jacket on the right-hand side (as you’re wearing it).
How long does the battery last?
The battery lasts around 20 hours or more at normal usage.
How do I wash the product?
A Visijax jacket can simply be washed in a washing machine at a temperature of 30 degrees. DO NOT use bleach on the jacket. Before washing, make sure the battery has been removed! After being washed, let the jacket drip dry. DO NOT attempt to wring the jacket or put it in the tumble dryer. DO NOT try to iron the jacket! All washing instructions can be found on the tag inside the jacket.
The Jacket is flashing very rapidly – what does this mean?
The rapid flash has been designed to let the wearer know that the battery requires recharging. All you need to do is attach the battery to the USB cable that was supplied with the jacket (probably still in the tail pocket under the red LED's on the back of the jacket) and connect to a USB-enabled plug or laptop. Charge for a few hours until the light on the battery turns green. Each flash mode should then operate as normal. If the ‘slow-fast-constant’ mode sequence is not operating as usual, please email: CruiserRepublic.com with details and description of item.